H1P 115/130 Auxiliary mounting - Option H2 (SAE A, 9 teeth)
Option H2, ISO 3019-1, flange 82-2 (SAE A, 9 teeth)
P003 386E
2x 106.4 ± 0.35
[4.189 ± 0.014]
8.1 ± 0.25
[0.319 ± 0.010]
329.857 ± 2.0
[12.986 ± 0.079]
314.73 ± 2.0
[12.391 ± 0.079]
4x 53.2 ± 0.175
[2.094 ± 0.007]
∅
88.621
+ 0.13
– 0
[3.489
+ 0.05
– 0
]
∅
82.601
+ 0.076
– 0
[3.252
+ 0.003
– 0
]
15.3 + 1.0
– 0
[0.602 + 0.039
– 0
]
1.956
[0.077]
R 0.8 max.
[0.031]
Thread : M10x1.5-6H THD
Depth : 16.0 [0.63] min.
4x
O-ring seal required
ref 82.22 [3.237] I.D.
x 2.62 [0.103] cross section
Spline data
Number of teeth : 9
Pitch fraction
: 16/32
Pressure angle
: 30°
Pitch-
∅
: 14.288 [0.5625]
Typ of fit
: Fillet root side
per
: Ansi B92.1-1996 class 6
Mounting flange surface
Flange 82 - 2 per ISO 3019-1
to be paint free
Specifications
Option
H2
Spline
9 teeth, 16/32 pitch
Maximum torque
162 N•m [1430 lbf•in]
For definitions of maximum and rated torque values, refer to
H1 Axial Piston Pumps Basic Information,
BC00000057, the section “Shaft Torque Ratings and Spline Lubrication”.
C
Caution
Standard pad cover is installed only to retain coupling during shipping. Do not operate pump without an
auxiliary pump or running cover installed.
Technical Information
H1 Axial Piston Single Pumps, Size 115/130
Dimensions
42 |
©
Danfoss | May 2017
11063346 | BC00000198en-US0801
