A
G
H
J
K
M
N
S T
V
W
X
Y
Z
D
E
F
A
H1P
A B
G – Endcap options (Twin port, ISO 6162 split flange ports)
Align with options T – Filtration (below) and K – Auxiliary mounting pad
Code
Suction filtration
Integral full charge flow
filtration
Remote or external charge supply for full
charge flow filtration
D3
–
–
D6
–
–
D8
–
–
H – Mounting
G
ISO 3019-1, flange 152–4 (SAE D)
L
ISO 3019-1, flange 152–4 (SAE D), 4-bolt, speed sensor (
Align with option:
W – Special hardware features,
options: P2 and P4)
J – Input shaft
G2
ISO 3019-1, outer Ø44 mm - 4 (SAE D, 27 teeth splined shaft 16/32 pitch)
G3
ISO 3019-1, outer Ø44 mm - 4 (SAE D, 13 teeth splined shaft 8/16 pitch)
F3
Conical keyed shaft end similar to ISO 3019-1 code 44-3, taper 1:8 (key not supplied with pump)
K – Auxiliary mounting pad per ISO 3019-1
NN
None
E5
Flange 82–2, outer Ø16 mm - 4 (SAE C, 13 teeth 16/32 coupling)
Shipping cover
H1
Flange 82–2, outer Ø19 mm - 4 (SAE A, 11 teeth 16/32 coupling)
H2
Flange 82–2, outer Ø16 mm - 4 (SAE A, 9 teeth 16/32 coupling)
H3
Flange 101–2, outer Ø22 mm - 4 (SAE B, 13 teeth 16/32 coupling)
H4
Flange 152–4, outer Ø44 mm - 4 (SAE D, 13 teeth 8/16 coupling)
H5
Flange 101–2, outer Ø25 mm - 4 (SAE B-B, 15 teeth 16/32 coupling)
H6
Flange 127–4, outer Ø32 mm - 4 (SAE C, 14 teeth 12/24 coupling)
S1
Flange 101–2, outer Ø22 mm - 4 (SAE B, 14 teeth 12/24 coupling)
Align with option:
G – Endcap selection.
Technical Information
H1 Axial Piston Single Pumps, Size 115/130
Master Model Code
©
Danfoss | May 2017
11063346 | BC00000198en-US0801 | 13