Danfoss ET5040 Crimp Machine Operator’s Manual
15 | ©Danfoss ET5040 Crimp Machine Operator’s Manual | 2022.10.
BC425481951279en-000101
Operating Instructions
Manual Operation
Rotate the main power switch located on the right side of the machine to
the “On” position. Wait for the machine to boot up. (See figure 25)
Select “Manual Operation”. (See figure 26) Note: “Manual Operation” allows
operator to enter and save their own desired crimp specifications.
Manual Operation Screen is shown in figure 27. See explanation of all icon
on page 16. See operation sequence on page 18.
Figure 25
Figure 26
Figure 27
Step 1
Step 3
Step 2
Follow the settings and calibration steps prior to initial production use of the machine (Page 18)
!
NOTE
: Manual Operation is for crimping hose & fittings not in the pre-populated Danfoss database.
Summary of Contents for ET5040
Page 1: ......