Danfoss ET5040 Crimp Machine Operator’s Manual
28 | ©Danfoss ET5040 Crimp Machine Operator’s Manual | 2022.10.
BC425481951279en-000101
Accessories
Figure 47
Figure 50
Figure 48
Figure 51
Figure 49
Figure 52
Automatic Back Stop
Replaces controller activation of the crimper,
hose must engage with backstop to cycle the
crimper. (See figure 47) Crimping stops whenever
the hose no longer touches the back stop face.
Set actuation position of backstop prior to
plugging into crimper.
Mirror
Provides operator with additional viewing angles
to assist in correct alignment of crimp Position.
(See figure 50)
Manual Back Stop
Used for position control. Locate assembly to
desired position in crimp jaws. Adjust backstop to
contact fitting assembly. (See figure 48)
Magnetic Work Light
Magnetic work light provides improved visibility
in low light conditions. (See figure 51)
Foot Switch
Optional foot switch is available for crimp head
activation. (See figure 49) To activate foot switch,
select button on controller.
Table Top Die Storage Rack
Additional storage for standard size dies. (See
figure 52)
Summary of Contents for ET5040
Page 1: ......
