Danfoss ET5040 Crimp Machine Operator’s Manual
16 | ©Danfoss ET5040 Crimp Machine Operator’s Manual | 2022.10.
BC425481951279en-000101
Operating Instructions
Manual Operation Continued
Data entry field for naming custom
crimp specification. Note: Entry
not required for operation. Save
required to retain for future use.
Clears data entered from data entry
field.
Crimp diameter target (User defined
via pop up numerical keypad).
Set desired automatic retract open-
ing diameter/ position.
!
NOTE
: The crimp tooling
automatically retracts to this open-
ing diameter only when green icon
is displayed.
Offset for achieved diameter correc-
tion. Click icon to enter value.
Set dwell time. (Time at fully closed
position prior to auto open)
Tooling diameter. Tooling auto pop-
ulates, displaying suggested tooling
for target crimp diameter. Note:
User may input an alternate tooling
selection.
Auto Open
Red - Off
Green - On
(Touch icon to change)
Quick die change: Initiates the die
change, install sequence. (Touch to
change).
Save data to user input database.
Additional inputs (to switch param-
eters) (Page 17)
Return to “Home” screen.
Select number of pieces to crimp.
!
NOTE
:TNot required to crimp.
“0” selection will allow unlimited
crimps.
Displays total number of pieces
crimped so far.
Displays current position of crimp
tooling/pressure of crimp.
Icon Explanations:
Summary of Contents for ET5040
Page 1: ......
