Danfoss ET5040 Crimp Machine Operator’s Manual
9 | ©Danfoss ET5040 Crimp Machine Operator’s Manual | 2022.10.
BC425481951279en-000101
Tooling Removal - Using Quick Die Change Tool
When prompted to make a tooling change, close the head to the QDC
position. Head will stop and light will no longer illuminate when in QDC
position.
Align the eight pins on the QDC tool with the holes on the crimp dies,
insert the pins fully into the crimp dies until magnets are fully seated.
Gradually retract the crimp head completely until the crimp die holding
pins have completely disengaged from the intermediate dies.
Place the crimp dies into the storage rack, rotate the QDC to the left,
(counter clockwise) this locks the die segments into the storage rack.
Figure 10
Figure 11
Figure 12
Figure 13
Step 1
Step 3
Step 2
Step 4
Summary of Contents for ET5040
Page 1: ......