Danfoss ET5040 Crimp Machine Operator’s Manual
11 | ©Danfoss ET5040 Crimp Machine Operator’s Manual | 2022.10.
BC425481951279en-000101
Operating Instructions Crimp Selections - Auto Mode
Rotate the main power switch (See figure 14) on the right side of the
machine to the “On” position. Wait for the machine to boot up.
Select “Crimp Selections” for Danfoss Factory Pre-populated Specifications
(See figure 15)
Select desired product line. (See figure 16)
• Aeroquip
• Everflex
• Industrial
• Weatherhead
• Synflex
Note:
Favorites icon provides direct selection of commonly
used crimp selections.
Select Hose Series (Use either method A or method B):
A Use scroll bar on right side of screen to scroll through the available
hose series. Make selection by touching hose series, then press check
mark. (See figure 17)
B Touch filter box on the left, key pad will pop up, type in desired hose
series and press check mark.
Note:
Key pad will disappear and selected series will populate in option
A. Then press check mark.
Figure 14
Figure 15
Figure 16
Figure 17
Step 1
Step 3
Step 2
Step 4
Follow the settings and calibration steps prior to initial production use of the machine (Page 19)
Summary of Contents for ET5040
Page 1: ......