Danfoss ET5040 Crimp Machine Operator’s Manual
12 | ©Danfoss ET5040 Crimp Machine Operator’s Manual | 2022.10.
BC425481951279en-000101
Operating Instructions
Crimp Selections - Auto Mode Continued
Screen will prompt you to select “Hose Dash” size, press down arrow to view
options. Make selection by pressing desired dash size. (See figure 18)
Next select “Fitting Type” by pressing down arrow to view options and
pressing desired “Fitting Type”. (See figure 19)
Press Check prompt on bottom of screen to finish selection process and to
display tooling requirements for hose series selection. (See figure 20)
“Current Selection” screen displays selected product, assembly instructions
and appropriate specifications. (See figure 21)
Install the defined dies per the load/ unload procedure. (Page 9) Select the
check mark when the correct dies are securely installed. (See figure 20)
Figure 18
Figure 19
Figure 20
Figure 21
Step 5
Step 7
Step 6
Step 8
Step 9
Summary of Contents for ET5040
Page 1: ......