![background image](http://html1.mh-extra.com/html/danalock/us-version/us-version_quick-manual_3359056009.webp)
Index
Remove the old thumb turn on your
door, but please keep the screws that
held it for later use.
In the box you will find 2 tailpiece
extenders for flat and square
tailpieces, making your danalock
fit most deadbolts.
Now fasten the baseplate
with the screws that original
ly held the thumb turn and
cylinder piece.
Important! The cylinder tailpiece have to align with the
door surface.
Extend the tailpiece with one of the two
extenders before you mount the baseplate. The tailpiece
extender should stick out 10 mm from the baseplate.
Click the lid off your danalock with your
nails, or loosen the lid by gently turning
a screwdriver in the slot at the rim of
the shell.
Place your danalock on the base, be
sure the cylinder tailpiece fits in the
center.
Fasten the 3 base-screws.
Click the lid back on. Now Your
danalock is now ready for use.
10 mm
align with
the door
surface
The danalock comes with batteries inserted, but a thin plastic folio
guarantee that your new danalock is fully charged. Remove the folio
and the danalock lits up with a green light for 5-10 seconds.
Loosen the 3 base-screws placed right underneath the
printed circuit board with a screwdriver.
08
danalock installation:
Inclusion mode
Inclusion mode:
In order to make your
danalock connect to your
smartphone, a gateway,
if you want to reset the
danalock to factory
settings or delete all data
on it, you need to put the
danalock in inclusion
mode.
3 beeps
release finger
short confirm beep
2 beeps
release finger
short confirm beep
5 beeps
release finger
short confirm beep
10 beeps
release finger
short confirm beep
Smartphone
Smartphone
Reset
Reset
Factory settings
Factory settings
Gateway
Gateway
3 beeps
release finger
short confirm beep
2 beeps
release finger
short confirm beep
5 beeps
release finger
short confirm beep
10 beeps
release finger
short confirm beep
Smartphone
Smartphone
Reset
Reset
Factory settings
Factory settings
Gateway
Gateway
3 beeps
release finger
short confirm beep
2 beeps
release finger
short confirm beep
5 beeps
release finger
short confirm beep
10 beeps
release finger
short confirm beep
Smartphone
Smartphone
Reset
Reset
Factory settings
Factory settings
Gateway
Gateway
3 beeps
release finger
short confirm beep
2 beeps
release finger
short confirm beep
5 beeps
release finger
short confirm beep
10 beeps
release finger
short confirm beep
Smartphone
Smartphone
Reset
Reset
Factory settings
Factory settings
Gateway
Gateway
Factory resetting
Start with deleting the lock in the App.
If this is the first time you read about
the danalock App, please read here.
Swipe from right to left, press the
settings icon, and find the ”Delete
your lock” button at the bottom of
the page. Read about deleting here.
Press the touch button in the middle of your
danalock, and wait for the sound of 10 beeps.
When you hear the 10th beep, release the
finger and the lock will make a short counter
beep to confirm that the factory reset mode
has been activated. (Now all the custom
made settings are deleted and the danalock’s
memory is reset to new / default).
Press the touch button in the middle of your danalock, and wait for
the sound of 3 beeps. When you hear the 3 beeps, release the finger and the lock
will sound a short counter beep, to confirm that the inclusion mode has been
activated. (For establishing a connection between the smart phone and the
danalock using bluetooth smart technology).
Press the touch button in the middle of your danalock, and wait for the
sound of 2 beeps. When you hear the 2 beeps, release the finger and the
lock will make a short counter beep to confirm that the inclusion mode has
been activated. (For establishing a connection between the danalock and a
gateway using z-wave).
Press the touch button in the middle of your danalock, and wait for the sound
of 5 beeps. When you hear the 5 beeps, release the finger and the lock will
make a short counter beep to confirm that the reset keys mode has been
activated. (Now the stored encryption keys is deleted, and the memory of all
the keys are gone).