Index
Remove the old thumb turn on your
door, but please keep the screws that
held it for later use.
In the box you will find 2 tailpiece
extenders for flat and square
tailpieces, making your danalock
fit most deadbolts.
Now fasten the baseplate
with the screws that original
ly held the thumb turn and
cylinder piece.
Important! The cylinder tailpiece have to align with the
door surface.
Extend the tailpiece with one of the two
extenders before you mount the baseplate. The tailpiece
extender should stick out 10 mm from the baseplate.
Click the lid off your danalock with your
nails, or loosen the lid by gently turning
a screwdriver in the slot at the rim of
the shell.
Place your danalock on the base, be
sure the cylinder tailpiece fits in the
center.
Fasten the 3 base-screws.
Click the lid back on. Now Your
danalock is now ready for use.
10 mm
align with
the door
surface
The danalock comes with batteries inserted, but a thin plastic folio
guarantee that your new danalock is fully charged. Remove the folio
and the danalock lits up with a green light for 5-10 seconds.
Loosen the 3 base-screws placed right underneath the
printed circuit board with a screwdriver.
danalock App:
Get current battery status
20
Get current battery
status:
To get the Danalock
current status, you
need to open the key
menu.
You open the key menu
by swiping the key
from right to left
(using your finger).
Here you’ll find a green bar indicating
the amount of power left on the
batteries.
The further right the bar is streched
the more power you have got on your
danalock.
Press the battery icon.
Press the Lock settings icon.
With the Alarm-timer function you
can make the App warn you, when
the batteries in your danalock are
running low.
Press on the slider-dot and set the
time for the warning to appear.
If the sound on your smartphone
is deactivated, the warning will be
ignored.
