![background image](http://html1.mh-extra.com/html/danalock/us-version/us-version_quick-manual_3359056013.webp)
Index
Remove the old thumb turn on your
door, but please keep the screws that
held it for later use.
In the box you will find 2 tailpiece
extenders for flat and square
tailpieces, making your danalock
fit most deadbolts.
Now fasten the baseplate
with the screws that original
ly held the thumb turn and
cylinder piece.
Important! The cylinder tailpiece have to align with the
door surface.
Extend the tailpiece with one of the two
extenders before you mount the baseplate. The tailpiece
extender should stick out 10 mm from the baseplate.
Click the lid off your danalock with your
nails, or loosen the lid by gently turning
a screwdriver in the slot at the rim of
the shell.
Place your danalock on the base, be
sure the cylinder tailpiece fits in the
center.
Fasten the 3 base-screws.
Click the lid back on. Now Your
danalock is now ready for use.
10 mm
align with
the door
surface
The danalock comes with batteries inserted, but a thin plastic folio
guarantee that your new danalock is fully charged. Remove the folio
and the danalock lits up with a green light for 5-10 seconds.
Loosen the 3 base-screws placed right underneath the
printed circuit board with a screwdriver.
danalock App:
Create user prpfile
Create user profile
You will be forwarded to
the Create User Page.
The first 4 fields
are mandatory:
Username:
This can contain any
characters from a to z, both
upper and lowercase. The only
characters besides these are
’.’,’-’,’_’,’@’.
Email:
Write your email address.
Make sure you enter a valid email
address, as it is essential for
resetting your password. It is
also essential for future
features.
Password:
Your password can
contain any character and must
be at least six characters long.
Confirm Password:
This field
must be exactly the same as the
password field. It is used to verify
that the password is not
misspelled.
It is optional to fill out
the last 3 fields.
12
Scroll to the bottom of the
page and press ”Send”.
You have now created a new user
and are ready to login to the danalock
application.
Now you can log in. This is how you
start the application each time.
Fill in the Username and Password
fields. Press the Login button.
You are now logged into the
danalock app.
If it’s the first time you log into the
danalock App your next move will
be to add a new lock to the application.