Index
Remove the old thumb turn on your
door, but please keep the screws that
held it for later use.
In the box you will find 2 tailpiece
extenders for flat and square
tailpieces, making your danalock
fit most deadbolts.
Now fasten the baseplate
with the screws that original
ly held the thumb turn and
cylinder piece.
Important! The cylinder tailpiece have to align with the
door surface.
Extend the tailpiece with one of the two
extenders before you mount the baseplate. The tailpiece
extender should stick out 10 mm from the baseplate.
Click the lid off your danalock with your
nails, or loosen the lid by gently turning
a screwdriver in the slot at the rim of
the shell.
Place your danalock on the base, be
sure the cylinder tailpiece fits in the
center.
Fasten the 3 base-screws.
Click the lid back on. Now Your
danalock is now ready for use.
10 mm
align with
the door
surface
The danalock comes with batteries inserted, but a thin plastic folio
guarantee that your new danalock is fully charged. Remove the folio
and the danalock lits up with a green light for 5-10 seconds.
Loosen the 3 base-screws placed right underneath the
printed circuit board with a screwdriver.
danalock installation:
Remove the
current door lock
02
Power up the lock
03
Mounting the
backplate on the door
04
Using the
tailpiece extenders
05
Mounting your danalock
to the backplate
06
Lock/unlock door
with the User button
07
Inclusion mode
08
danalock App:
Download from App Store
and Google Play
10
Create a user
11
Create user profile
12
Adding a new lock
13
Install new lock
14
Refresh key
15
Lock/Unlock
16
Sharing keys with others 17
Accessing lock settings 18
Lock settings
19
Get current battery status 20
Bluetooth settings
21
Special for iOS
Auto unlock
22
Auto unlock
23
Activate Auto unlock 24
Auto unlock Ad-ons
25
Knock to unlock
26
Knock to unlock add-ons 27
01
