![background image](http://html1.mh-extra.com/html/danalock/us-version/us-version_quick-manual_3359056023.webp)
Index
Remove the old thumb turn on your
door, but please keep the screws that
held it for later use.
In the box you will find 2 tailpiece
extenders for flat and square
tailpieces, making your danalock
fit most deadbolts.
Now fasten the baseplate
with the screws that original
ly held the thumb turn and
cylinder piece.
Important! The cylinder tailpiece have to align with the
door surface.
Extend the tailpiece with one of the two
extenders before you mount the baseplate. The tailpiece
extender should stick out 10 mm from the baseplate.
Click the lid off your danalock with your
nails, or loosen the lid by gently turning
a screwdriver in the slot at the rim of
the shell.
Place your danalock on the base, be
sure the cylinder tailpiece fits in the
center.
Fasten the 3 base-screws.
Click the lid back on. Now Your
danalock is now ready for use.
10 mm
align with
the door
surface
The danalock comes with batteries inserted, but a thin plastic folio
guarantee that your new danalock is fully charged. Remove the folio
and the danalock lits up with a green light for 5-10 seconds.
Loosen the 3 base-screws placed right underneath the
printed circuit board with a screwdriver.
danalock App:
Special for iOS Auto unlock
22
Special for iOS
Auto unlock
Note: If you want to
use the Auto unlock or
Knock to unlock feature
on your iphone, a
warning will occur
asking you to activate
location services.
You will also have to activate
Background updates
if you want
to use Auto unlock and Knock to
unlock with your phone.
This is done in your iPhone settings
under privacy.
Do this in your iPhone settings under
general, please activate ”Background
App Refresh”.