![background image](http://html1.mh-extra.com/html/colosus/ndl/ndl_manual_2638140001.webp)
Colosus Digital Smart Door Lock
IMPORTANT
1. Keep physical metal key safe and accessible to AVOID LOCKOUT! Please write down all
programmed passcodes for your lock and keep them in a safe place!
2. This lock is NOT WATERPROOF/WATER-RESISTANT. However, you CAN use it as an exterior door
lock as long as you have a roof protecting the lock from direct water exposure.
3. Be sure to use quality batteries for best performance. AVOID off-brand batteries and be sure to
change the battery at first sight of low battery - flashing red light.
4. DO NOT use this lock outside the temperature range of 14 to 122 fahrenheit.
5. For ANY questions (i.e. ordering more key fobs/remotes, troubleshooting, commercial bulk
orders), email us with your ORDER ID at
6. WATCH our installation/programming videos by emailing us at [email protected] with
your ORDER ID.
Understanding the Passcode
The passcode consists of 8 numbers that are entered with # at the end, to unlock the door or
program the lock (i.e. 00123456#). It consists of a 2 digit prefix from 10-59 and a 6 digit code
which can be any combination of numbers you choose. A type of passcode is the mastercode,
which is used to initiate programming for the lock. When entered on its own, it can also unlock
the door. The default mastercode is 00123456, however you can change this to your own
numbers. Keep in mind that only the mastercode has the prefix 00 and no other passcode can
use the prefix 00.
How to Change the Mastercode (Optional but recommended)
1. Enter
*5#00#123456#[your 6 digit code]#
--->you will hear a long beep which signals the
change was successful.
2. Now you can try your new mastercode, by entering 00[your 6 digit code]#
EXAMPLE: To change the default mastercode, 00123456 to 00121212, you would enter
*5#00#123456#121212# ---> Now the mastercode 00123456 has been changed to 00121212.
How to Add a Passcode
You can program up to 50 passcodes on this lock.
To add a passcode, first choose a prefix from 10-59. The prefix cannot be shortened or omitted.
Next, you will add a 6 digit code to complete the passcode. There are no restrictions to what this
6 digit code can be.
1. Enter your mastercode# ---> wait for an ascending beep
2. Enter *1#1#[your passcode]# ---> wait for an ascending beep
3. Your passcode has now been added. Try it out by entering [your passcode]#.
Example: Let’s say, we want to add the passcode 12112233, you would enter:
1. 00123456# (default mastercode)
How to Reset the Lock to Factory Settings
Note: Once you reset the lock to factory settings, all previously programmed passcodes, key fobs,
and remote(s) will no longer work. You will need to reprogram all methods.
1. Open the back cover of the battery and you will see a black button located towards the base of
the battery case. This is the reset button.
2. Press and hold for 3 seconds until you hear two beeps. At this time, the number pad will light up
in red. Once the lights turn off, the lock will be back to factory settings.
3. Now you should be able to use 00123456# to unlock the door as well as program your codes, key
fobs, and remote.
Additional Features
Anti-Peek
:
To protect your passcode, you can enter as many random numbers after your passcode
and still be able to unlock the door.
Anti-Theft: The lock will go into shutdown mode after 3 wrong entries. After the third wrong entry,
the lock will not accept any more passcode entries and will be disabled for 5 minutes. While in
shutdown mode, you can still unlock the door by using your key fob, remote, and physical key.
NOTE: For security reasons, you are not able to change the number of entries before the lock goes
into shutdown mode, nor are you able to change the duration that the lock is in shutdown mode.
Low Battery Alert: Your lock will start blinking a red light to alert you to change the batteries.
Multi-Lock Sync: This feature allows you to program an individual key fob or remote to unlock two
or more Colosus locks of the same model. You can do this by programming the same key fob or
remote on to several Colosus locks of the same model with the instructions in this manual.
Warranty
Colosus, Inc. warrants to the original consumer of this new product that it is free from defects in
materials and workmanship for 1 year from the date of purchase. Consumer will be required to
submit their original order ID or receipt as proof of purchase, to be eligible for a warranty claim.
Colosus, Inc. will replace at its discretion any part of the product, which in its opinion is defective,
using refurbished parts, provided the product has NOT been abused, misused, altered, improperly
installed, operated, maintained, improperly repaired and/or damaged after purchase, and was
used according to instructions, and was used only with accessories approved by Colosus, Inc.
Installation is the responsibility of the consumer and is not covered by the warranty. Colosus, Inc. is
NOT LIABLE FOR INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES. All repairs, and
replacement parts are covered by Colosus, Inc. In addition, Colosus, Inc. will cover shipping cost of
any replacement/repaired item(s) to the customer, however, for all exchanges, the customer is
responsible for the shipping cost to ship their original lock to Colosus, Inc.
Exchanges
All purchases made through Amazon are eligible for an exchange 30 days of receipt of shipment
through Amazon Customer Support. After 30 days, customers can contact Colosus Support by
emailing us at [email protected] and work with our support staff on warranty claims for
repairs/replacements. For exchange details, please contact us directly for a full overview.
I Need Help!
For the fastest response, email us with your ORDER ID at [email protected]. We operate M-F
9AM-5PM PST. For most issues, please reread the instructions thoroughly in this manual, watch the
available videos, check that the battery is not dead, and lastly, try resetting the lock to factory
settings.
00 123456
PASSCODE
PREFIX
CODE
00 123456