![background image](http://html1.mh-extra.com/html/danalock/us-version/us-version_quick-manual_3359056020.webp)
Index
Remove the old thumb turn on your
door, but please keep the screws that
held it for later use.
In the box you will find 2 tailpiece
extenders for flat and square
tailpieces, making your danalock
fit most deadbolts.
Now fasten the baseplate
with the screws that original
ly held the thumb turn and
cylinder piece.
Important! The cylinder tailpiece have to align with the
door surface.
Extend the tailpiece with one of the two
extenders before you mount the baseplate. The tailpiece
extender should stick out 10 mm from the baseplate.
Click the lid off your danalock with your
nails, or loosen the lid by gently turning
a screwdriver in the slot at the rim of
the shell.
Place your danalock on the base, be
sure the cylinder tailpiece fits in the
center.
Fasten the 3 base-screws.
Click the lid back on. Now Your
danalock is now ready for use.
10 mm
align with
the door
surface
The danalock comes with batteries inserted, but a thin plastic folio
guarantee that your new danalock is fully charged. Remove the folio
and the danalock lits up with a green light for 5-10 seconds.
Loosen the 3 base-screws placed right underneath the
printed circuit board with a screwdriver.
19
danalock App:
Lock settings
Lock settings:
If you press the
padlock symbol you
get to the lock settings
Here you can change
and modify the lock,
power settings, make
pinkodes and adjust
the Bluetooth settings.
Lock settings:
Mode:
Choose between Normal
and Power saving mode.
Normal if your lock needs
more power to turn.
Choose powersaving mode
if your lock works right in
this mode. It expands the
battery lifetime.
Direction:
Here you can choose the
direction you lock shall turn
in order to lock your door.
Clockwise or Counter-clockwise.
Turn
Here you determine how
degrees:
much your lock should
turn to lock or unlock your
door.
Auto
Decide how many seconds
lock time:
after you have unlocked
your door you want the
danalock to auto lock.
Speed:
Choose how fast you want
your danalock to unlock
your door. Slow speed gives
the motor more power,
which is needed if the lock
on your door is hard to move.
Sound:
Turn the alarm sounds
on the lock on or off.
Important:
Remember to save your
changes when you have made
adjustments to the lock settings.
Press the ”Save all my choices to
the lock” button at the bottom.