Index
Remove the old thumb turn on your
door, but please keep the screws that
held it for later use.
In the box you will find 2 tailpiece
extenders for flat and square
tailpieces, making your danalock
fit most deadbolts.
Now fasten the baseplate
with the screws that original
ly held the thumb turn and
cylinder piece.
Important! The cylinder tailpiece have to align with the
door surface.
Extend the tailpiece with one of the two
extenders before you mount the baseplate. The tailpiece
extender should stick out 10 mm from the baseplate.
Click the lid off your danalock with your
nails, or loosen the lid by gently turning
a screwdriver in the slot at the rim of
the shell.
Place your danalock on the base, be
sure the cylinder tailpiece fits in the
center.
Fasten the 3 base-screws.
Click the lid back on. Now Your
danalock is now ready for use.
10 mm
align with
the door
surface
The danalock comes with batteries inserted, but a thin plastic folio
guarantee that your new danalock is fully charged. Remove the folio
and the danalock lits up with a green light for 5-10 seconds.
Loosen the 3 base-screws placed right underneath the
printed circuit board with a screwdriver.
danalock App:
Knock to unlock
Knock to unlock
The Knock to unlock
function gives you the
possibility to unlock your
door by knocking lightly
on your smartphone when
you are near your home.
The App needs to be
running on your phone if
you want to Knock to
unlock.
26
Knock to unlock works best
if you
hold the smartphone in your hand,
from a bag or the pocket of a jacket.
If you have your mobile in the pocket
of a tight pair of jeans, the Bluetooth
signal might get distorted, causing
the Auto unlock to fail occasionally.
Bank let på din
mobil, og din dør
bliver låst op
Entering your
danalock’s
Bluetooth
range
You can simply knock
lightlyon your
smartphone and the
danalock unlocks
your door