Access control
Keypad and Bluetooth
•
Operating voltage 12~24Vdc
•
Diecast metal
•
Bluetooth
•
Backlit keypad
•
Vandal resistant
•
Built in tamper alarm and buzzer
(85dB)
•
Weather resistant: IP65
•
2 LED displays with audible indication
BLUETOOTH
WEATHER
RESISTANT
−
IP 65
−
VANDAL
RESISTANT
LED
STATUS
BLUE
POWER ON, STANDBY MODE
GREEN UNLOCKED, DOOR ALWAYS UNLOCKED
RED
INVALID ACCESS, DOOR ALWAYS LOCKED
AUDIBLE BEEPS
STATUS
1 SHORT BEEP
KEY PRESS
1 LONG BEEP
VALID ACCESS, RESET IS COMPLETE
2 SHORT BEEPS
LOCKING COMPLETE
3 SHORT BEEPS
INVALID ACCESS
CONSTANT
BEEPING
BLUETOOTH DEVICE VANDALISED
DOOR SENSOR IS ON
Reset Procedures
1. Power off Access Control Keypad.
2. Move the pin Jumper to P2 and P3, then power on.
3. Hear a long beep to complete resetting procedures.
4. Move the Pin jumper back to P1 and P2 to Normal setting.
5. Login as Admin and check all users, audit trail events are all cleared
and everthing is reset to factory default settings, except device name.
2
3
1
5
6
4
8
9
7
0
#
120
22
76
All dimensions in mm
40
Access control
Manual
RS PRO
Die Cast Metal Keypad Lock With LED Indicator
Stock No:
192-4543
