Dalsa Spyder2 S2-1-40 Series, User Manual

Page: 69 / 77

69 Spyder2 User’s Manual
03-32-10091-04 DALSA
Code Command Short
Form Parameters Description
32 set_gain
sg t f
Set the analog gain. The first
parameter is the tap selection
either
1
or
0
for all taps. The
second parameter is a gain
value specified from
–10
to
10
. A gain value of 0 sets the
camera to its nominal gain.
33 set_lower_threshold
slt i
Set the lower threshold to a
value from
0
to
255
for 8-bit
data modes, and
0
to
1023
for
10-bit.
34 set_netmessage_mode
snm i
Enable/disable camera
messages unrelated to the
executed network command:
0
: Enable messages, default
1
: Disable messages
35 set_pretrigger
sp i
Set the pretrigger to a value
from
0
to
15
.
36 set_prnu_coeff
spc i i
Set the PRNU coefficient. The
first parameter is the pixel
number within the range 1 to
the sensor pixel count. The
second parameter is a
specified value within the
range
0
to
511
.
37 set_subtract_background
ssb t i
Subtracts the input value from
the output signal. The first
parameter is the tap selection
either
1
or
0
for all taps. The
second parameter is the
subtracted value in a range
from
0
to
511
.
38 set_sync_frequency
ssf i
Sets the line rate, in exposure
mode 2, to a value from
1000Hz to camera's maximum
line rate. Value rounded
up/down as required.
39 set_system_gain
ssg t i
Set the digital gain. The first
parameter is the tap selection
either
1
or
0
for all taps. The
second parameter is a gain
value is specified from
0
to
511
.
40 set_upper_threshold
sut i
Set upper threshold to a value
from
0
to
255
in 8-bit data
modes, and
0
to
1023
in 10-
bit.
41 set_video_mode
svm i
Switch between calibrated and
uncalibrated modes:
0
: Uncalibrated video,