65
Spyder2 User’s Manual
03-32-10091-04
DALSA
GCP Screen
Desctiption
Exposure Time:
197.950 uSec
Current exposure time setting.
Value is set with the
set
command. See section 3.9
Setting Line Rate and Exposure
Mode for details.
End-Of-Line Sequence:
on
States whether an end of line
sequence is turned on or off.
Set using the
eol
command.
See section 3.17 Test Patterns
for details.
Upper Threshold:
240
Upper threshold value set with
the
sut
command.
Lower Threshold:
15
Lower threshold value set with
the
slt
command.
Region of Interest:
0001-512
Region of interest size set with
the
roi
command. See section
3.10 Setting a Region of Interest
for details.
B4 All Available Commands
As a quick reference, the following table lists all of the commands available to the camera
user. For detailed information on using these commands, refer to Chapter 3.
The first column of the table lists command codes returned as first code from
gps
.
Note:
Even though the Spyder2 camera has only one output tap, you must enter a value
for the tap parameter, either a
1
to indicate one tap, or a
0
to indicate all taps. These two
values are interchangeable and mean the same thing. This parameter has been included in
the Spdyer2 software to keep the software compatible with other DALSA cameras.
Table 7: All Available Commands
Code Command
Short
Form
Parameters Description
0
calibrate_analog_gain
cag
t i
Calibrates the analog gain. The
first parameter is the tap
selection either
1
or
0
for all
taps. The second parameter is
a line average in a range from
64
to
251
DN for 8-bit mode
and
256
to
1007
DN for 10-bit.
This command requires a
constant light input and only
works in uncalibrated mode.
1
calibrate_analog_offset
cao
t i
Calibrates the analog offset.
The first parameter is the tap
selection either
1
or
0
for all
taps. The second parameter is
a line average in a range from
1
to
100
DN for 8-bit mode
and
4
to
400
for 10-bit. This
command only works in
uncalibrated mode.
Parameters:
i
= integer
f
= float
t
= tap selector
s
= string
x1
= pixel start
number
x2
= pixel end number
[]=
optional
parameter
Summary of Contents for Spyder2 S2-1-40 Series
