Dalsa Spyder2 S2-1-40 Series, User Manual

Page: 22 / 77

22 Spyder2 User’s Manual
03-32-10091-04 DALSA
3.6 Setting Baud Rate
To set the speed of the camera serial communication port, use the command:
Syntax:
sbr i
Syntax Elements:
i
Baud rate. Available baud rates are:
9600
(Default),
19200
,
57600
, and
115200
.
Notes: •
Power-on rate is always 9600 baud.
•
The
rc
(reset camera) command will not reset the camera to
the power-on baud rate.
Example:
sbr 57600
3.7 Setting the Data Mode
To select the camera output mode, use the command:
Syntax:
sdm i
Syntax Elements:
i
0
8-bit, using port A for single processor configuration
1
10-bit, using ports A and B for single processor configuration
Notes:
•
To obtain the current data mode, use the command
gcp
.
Example:
sdm 0
3.8 Setting the Video Mode
The video mode sets whether the camera is running in calibrated or uncalibrated mode,
or if it is generating a test pattern.
To set the video mode, use the command:
Syntax:
svm i
Syntax Elements:
i
Video mode to use. Allowable values are:
0
Uncalibrated video, deactivated video correction
1
Calibrated video, activated video correction
2
Test pattern right
Notes: •
To obtain the current video mode, use the command
gcp
.
Example
svm 1