70
•
Operational Reference
Linea SWIR GigE Series Camera
Image Format Control Category
The Linea SWIR GigE Image Format controls shown by CamExpert, group parameters used to
configure camera pixel format, image cropping and binning functions. An internal test image
function is used to qualify camera setup without a lens.
Parameters in gray are read only, either always or due to another parameter being disabled.
Parameters in black are user set in CamExpert or programmable via an imaging application.
Features listed in the description table but tagged as Invisible are usually for Teledyne DALSA or
third party software usage — not typically required by end user applications.
Figure 39: Image Format Features
Image Format Control Feature Description
The following table describes these features along with the view attribute and device version. When
a Device Version number is indicated, it represents the camera’s software functional group, not a
firmware revision number. As Linea SWIR GigE camera’s capabilities evolve the device version will
increase, identifying the supported function package. New features for a major device version
release will be indicated by
green text
for easy identification.
The Description column will indicate which feature is a member of the DALSA Features Naming
Convention (denoted by DFNC), versus the GenICam Standard Features Naming Convention (SFNC
not shown).
