Linea SWIR GigE Series Camera
Operational Reference
•
33
Display Name
Feature & Values
Description
Device
Version
& View
Device Scan Type
DeviceScanType
Scan type of the sensor. < RO>
1.00
Beginner
Linescan
Linescan 1D Linescan sensor.
Sensor Color Type
sensorColorType
Defines the camera sensor color type. < RO >
1.00
Beginner
DFNC
Monochrome Sensor
Monochrome Sensor color type is monochrome.
Sensor Width
SensorWidth
Defines the sensor width in active pixels.
< RO>
1.00
Expert
Sensor Height
SensorHeight
Defines the sensor height in active lines.
< RO>
1.00
Expert
Input Pixel Size
pixelSizeInput
Size of the image input pixels, in bits per pixel.
< RO >
1.00
Expert
DFNC
12 BPP
Bpp12 Sensor output data path is 12 bits per pixel.
Acquisition Line Rate
AcquisitionLineRate
Specifies the camera internal line rate, in Hz.
1.00
Beginner
Exposure Mode
ExposureMode
Sets the operation mode for the camera’s
exposure.
1.00
Beginner
Timed
Timed The exposure duration time is set using the
Exposure Time feature and the exposure starts
with a LineStart event.
Trigger Width
TriggerWidth Uses the width of the trigger signal pulse to control
the exposure duration. Use the Trigger Activation
feature to set the polarity of the trigger. The
Trigger Width setting is applicable when the
LineStart trigger is enabled and a signal is selected
as trigger source.
Exposure Time
ExposureTime
Sets the exposure time (in microseconds) when the
Exposure Mode feature is set to Timed.
1.00
Beginner
Exposure Delay
exposureDelay
Specifies the delay in microseconds (µs) to apply
after the LineStart event before starting the
ExposureStart event.
1.00
Beginner
DFNC
Sensor Gain Selector
Sensor Analog
Selects which gain is controlled when adjusting
gain features.
1.00
Beginner
Sensor
SensorAnalog Apply an analog gain adjustment within the sensor
to the entire image. Conversion Efficiency table:
Gain = 4.0 is about 4.0 uV/e-; Gain = 3.0 -> 2.91
uV/e-; Gain = 2.0 -> 1.07 uV/e-; Gain = 1.0 ->
0.128 uV/e
Digital
DigitalAll Apply a digital gain adjustment to the entire image.
This independent gain factor is applied to the
image after the sensor.
1.00
Beginner
Gain
Gain
Sets the selected gain as an amplification factor
applied to the image.
1.00
Beginner
Black Level Selector
BlackLevelSelector
Selects which tap is controlled by the Black Level
feature.
1.00
Beginner
Analog
AnalogAll
Black Level
BlackLevel
Black level (offset) in DN.
1.00
Expert
