Linea Lite GigE Series Camera
Operational Reference
•
55
Device Built-In Self Test
Status
deviceBISTStatus
Return the status of the device Built-In Self test. Possible
return values are device-specific.
Beginner
DFNC
Passed
Passed No failure detected
Firmware update failed
FirmwareUpdateFailure Last firmware update operation failed.
Sensor Initialization
Failure
SensorFailure There was an error initializing the sensor; the camera may
not be able to capture images.
Firmware Error
FirmwareError Firmware encountered an error during streaming.
Unexpected Error
Unexpected_Error Switched to recovery mode due to unexpected software
error.
Device Built-In Self Test
Status All
deviceBISTStatusAll
Return the status of the device Built-In Self Test as a bitfield.
The meaning for each bit is device-specific.
Beginner
DFNC
Device Reset
DeviceReset
Resets the device to its power up state. (W)
Beginner
Device Temperature
Selector
DeviceTemperatureSelector
Select the source where the temperature is read.
Beginner
Internal
Internal Read FPGA and/or PHY temperature.
MaxInternal
MaxInternal Records the highest device temperature since power up.
Value is reset on power off.
Device Temperature
DeviceTemperature
The temperature of the selected source in degrees Celsius
Beginner
Power-up Configuration
Selector
UserSetDefault
Selects the camera configuration set to load and make active
on camera power-up or reset. The camera configuration sets
are stored in camera non-volatile memory. (RW)
Beginner
None
None Keep Internal configuration.
Factory Setting
Default Load factory default feature settings.
UserSet1
UserSet1 Select the user defined configuration UserSet 1 as the Power-
up Configuration.
UserSet2
UserSet2 Select the user defined configuration UserSet 2 as the Power-
up Configuration.
UserSet3
UserSet3 Select the user defined configuration UserSet 3 as the Power-
up Configuration.
UserSet4
UserSet4 Select the user defined configuration UserSet 4 as the Power-
up Configuration.
UserSetSelector
Selects the camera configuration set to load feature settings
from or save current feature settings to. The Factory set
contains default camera feature settings. User camera
configuration sets contain features settings previously saved
by the user. (RW)
Beginner
Factory Setting
Default Select the default camera feature settings saved by the
factory.
UserSet 1
UserSet1 Select the User Defined Configuration space UserSet1 to save
to or load from features settings previously saved by the
user.
UserSet 2
UserSet2 Select the User Defined Configuration space UserSet2 to save
to or load from features settings previously saved by the
user.
UserSet 3
UserSet3 Select the User Defined Configuration space UserSet3 to save
to or load from features settings previously saved by the
user.
UserSet 4
UserSet4 Select the User Defined Configuration space UserSet4 to save
to or load from features settings previously saved by the
user.
Load Configuration
UserSetLoad
Loads the camera configuration set specified by the User Set
Selector feature, to the camera and makes it active. (W)
Beginner
Save Configuration
UserSetSave
Saves the current camera configuration to the user set
specified by the User Set Selector feature. The user sets are
located on the camera in non-volatile memory. (W)
Beginner
DeviceID
DeviceID
Displays the device’s
factory set serial number.
Invisible
Preliminary
