Dalsa Everywhereyoulook Linea Lite GigE, User Manual

Page: 69 / 147

Linea Lite GigE Series Camera Operational Reference • 67
Counter Start Source counterStartSource Select the counter start source. Counter increments from
0 to the value of the counterDuration feature. Expert
DFNC
Off Off Counter is stopped.
Acquisition Start AcquisitionStart Counter starts on the reception of the Acquisition Start
event.
Exposure Start ExposureStart Counter starts on the reception of the Exposure Start
event.
Exposure End ExposureEnd Counter starts on the reception of the Exposure End
event.
Rejected Trigger InvalidTrigger Counter starts on the reception of an Invalid Trigger
event.
Frame Start FrameStart Counter starts on the reception of the Frame Start event.
Line 1 Line1 Counter starts on the specified transitions on Line 1.
See Input Signals Electrical Specifications.
Line 2 Line2 Counter starts on the specified transitions on Line 2.
Timer 1 End Timer1End Counter starts on the reception of the Timer 1 End event.
Counter 1 End Counter1End Counter starts on the reception of the Counter 1 End
event.
Counter Start Line
Activation counterStartLineActivation Selects the activation mode of the input line trigger which
starts the counter. This is only applicable when the
counterStartSource feature selects a physical Line.
Expert
DFNC
Rising Edge RisingEdge Starts counting on rising edge of the selected Line.
Falling Edge FallingEdge Starts counting on falling edge of the selected Line.
Any Edge AnyEdge Starts counting on the falling or rising edge of the
selected Line.
Counter Incremental
Source counterIncrementalSource Select the event source which increments the counter.
The
Event Control section provides details and timing
diagrams for the supported events.
Expert
DFNC
Off Off Counter is stopped.
Acquisition Start AcquisitionStart Counts the number of Acquisition Start events.
Exposure Start ExposureStart Counts the number of Exposure Start events.
Exposure End ExposureEnd Counts the number of Exposure End events.
Frame Start FrameStart Counts the number of Frame Start events.
Rejected Trigger InvalidTrigger Counts the number of Invalid Trigger events.
Line 1 Line1 Counts the number of transitions on Line 1 (based on the
counterIncrementalLineActivation feature setting).
See Input Signals Electrical Specifications.
Line 2 Line2 Counts the number of transitions on Line 2 (based on the
counterIncrementalLineActivation feature setting).
Internal Clock InternalClock The counter increments on each microsecond tick of the
device internal Clock.
Timer 1 End Timer1End Counts the number of Timer 1 End events.
Counter Incremental Line
Activation counterIncrementalLineActivation Selects the counter signal activation mode for line inputs.
The counter increments on the specified signal edge or
level.
Expert
DFNC
Rising Edge RisingEdge Increment the counter on the rising edge of the selected
I/O Line.
Falling Edge FallingEdge Increment the counter on the falling edge of the selected
I/O Line.
Any Edge AnyEdge Increment the counter on the falling or rising edge of the
selected I/O Line.
Preliminary