82
•
Operational Reference
Linea Lite GigE Series Camera
Acquisition and Transfer Control Category
The Linea Lite GigE Acquisition and Transfer controls, as shown by CamExpert, groups parameters
used to configure the optional acquisition modes of the device. These features provide the
mechanism to either have acquisitions coupled to transfers (basic mode) or to decouple
acquisitions from both the camera transfer module and the host transfer module.
Acquisition and Transfer Control Feature Descriptions
Display Name
Feature & Values
Description
Standard
& View
Acquisition Status
Selector
AcquisitionStatusSelector
Selects the internal acquisition signal to read using
AcquisitionStatus
.
Expert
Acquisition Trigger Wait
AcquisitionTriggerWait Device is currently waiting for a trigger to capture one
or more frames.
Acquisition Active
AcquisitionActive Device is currently doing an acquisition of one or more
frames.
Acquisition Status
AcquisitionStatus
Reads the state of the internal acquisition signal
selected using the
AcquisitionStatusSelector
feature.
Expert
Acquisition Mode
AcquisitionMode
Set the acquisition mode of the device. It defines the
number of frames to capture during an acquisition and
the way the acquisition stops.
Beginner
Single Frame
SingleFrame One frame is captured for each AcquisitionStart
Command. An AcquisitionStop occurs at the end of the
Active Frame.
Multi-Frame
MultiFrame A sequence of frames is captured for each
AcquisitionStart Command. The number of frames is
specified by AcquisitionFrameCount feature. An
AcquisitionStop occurs at the end of the Active
Frame(s).
Continuous
Continuous Frames are captured continuously with AcquisitionStart
until stopped with the AcquisitionStop command.
Acquisition Frame Count
AcquisitionFrameCount
Number of frames to be acquired in MultiFrame
acquisition mode.
Beginner
Preliminary
