Dalsa Everywhereyoulook Linea Lite GigE, User Manual

Page: 64 / 147

62 • Operational Reference Linea Lite GigE Series Camera
I/O Control Feature Descriptions
Display Name Feature & Values Description Standard
& View
Trigger Selector TriggerSelector Selects which type of trigger to configure with the various
Trigger features.
Beginner
Single Line Trigger (Start) LineStart Selects a trigger starting the capture of a single line.
Single Frame Trigger(Start) FrameStart Selects a trigger starting the capture of a single frame.
Frame size is determined by image format feature
“Height”.
MultiFrame Trigger(Start) FrameBurstStart Selects a trigger to capture multiple frames. The number
of frames is specified by the triggerFrameCount feature.
Trigger Mode TriggerMode Controls the enable state of the selected trigger.
Beginner
Off Off The selected trigger is turned off.
On On The selected trigger is turned active.
Trigger Frames Count triggerFrameCount Sets the number of frames to acquire when a valid trigger
is received. This feature is available when the
TriggerSelector is set to MultiFrames Trigger.
DFNC
Beginner
Software Trigger TriggerSoftware Generate a software command internal trigger
immediately no matter what the
TriggerSource feature is
set to.
Beginner
Trigger Source TriggerSource Specifies the internal signal or physical input line to use as
the trigger source. The selected trigger must have its
TriggerMode set to ON.
Note, source availability may depend on the
TriggerSelector setting.
See Input Signals Electrical Specifications.
Beginner
Line 1 Line1 Select Line 1 (and associated I/O control block) to use as
the external trigger source. See
LineSelector feature for
complete list.
Line 2 Line2 Select Line 2 (and associated I/O control block) to use as
the external trigger source. See
LineSelector feature for
complete list.
Line 3 Line3 Select Line 3 (and associated I/O control block) to use as
the external trigger source. See LineSelector feature for
complete list.
Rotary Encoder rotaryEncoder1 Select Rotary Encoder to use as the external line trigger
source. (Available for LineStart trigger).
Timer1End Event Timer1End
Select the Timer1End Event as the internal trigger source.
(Available for FrameStart trigger).
Counter1End Event Counter1End Select the Counter1End Event as the internal trigger
source. (Available for FrameStart trigger).
Timestamp Modulo Event timestampModuleEvent Select the Timestamp Modulo Event as the internal trigger
source.
Trigger Input Line
Activation
TriggerActivation
Select the activation mode for the selected Input Line
trigger source. This is applicable only for external line
input lines.
Beginner
Rising Edge RisingEdge The trigger is considered valid on the rising edge of the
line source signal (after any processing by the line inverter
module).
Falling Edge FallingEdge The trigger is considered valid on the falling edge.
Any Edge AnyEdge The trigger is considered valid on any edge …
Trigger Delay TriggerDelay Specifies the delay to apply after receiving the trigger and
before activating
triggerEvent . The delay can be set in
microseconds.
Beginner
Preliminary