20
•
Linea Lite GigE Camera Quick Start
Linea Lite GigE Series Camera
Connectors
The Linea Lite GigE has two connectors:
•
A single
RJ45 Ethernet
connector for control and video data transmitted to/from the host
computer Gigabit NIC. The Linea Lite supports
PoE
). See Ruggedized
RJ45 Ethernet Cables for secure cables.
•
A
HD15
connector for camera power, trigger, strobe and general I/O signals. Teledyne DALSA
provides an optional breakout cable; see Mating GPIO Cable Assembly. Refer to the HD15 type
Connector Details section for pinout specifications.
The following figure of the Linea Lite GigE back end shows connector and LED locations. See the
Mechanical Specifications section for details on the connectors and camera mounting dimensions.
Status LED
RJ-45
Connector
HD15
Connector
1
5
11
15
Powering the Camera
Two options are available for powering the Linea Lite GigE camera:
1.
Power-over-Ethernet (PoE)
2.
Using a separate power supply connected to the HD15 connector.
If using PoE, for more information refer to Power over Ethernet (PoE) Support section.
Power supplies must meet the requirements defined in
Important:
Connect power via the HD15 connector or PoE,
not both
. Although Linea
Lite has protection, differences in ground levels may cause operational issues or
electrical faults. If both supplies are connected and active, the Linea Lite will use the
I/O power supply connector.
Preliminary
