DAKOTA ULTRASONICS PVX-B Operation Manual Download Page 10

Page: 10 / 86

Dakota Ultrasonics

2.3 Measure

The

PVX-B

is now ready to measure. There are two different measurement view

options, each with a specific purpose. The steps below outline how to toggle
between the different view mode options:

Selecting the Measurement View Option

1) Press the

MENU

key once to activate the menu items tab. Press the

MENU

key multiple times to tab right and the

ESC

key multiple times to tab left until

the

DISP

menu is highlighted and displaying the submenu items.

2) Use the

and

DOWN

arrow keys to scroll through the sub menu items

until

VIEW

is highlighted.

3) Use the

LEFT

and

RIGHT

arrow keys to scroll the view options.

4) Once the view is displayed, press the

MEAS

key to return to measurement

mode.

DIGITS:

Is a general digital view of the thickness value using a larger font size.

BSCAN:

The Time Based B-Scan provides the user with a cross sectional view of

the material being tested. This mode is useful when there is concern regarding the
profile of the blind surface.

Once the view has been selected according to the application requirements, the

BSCAN START (B-ST)

and

BSCAN DEPTH (B-DEP)

of the screen will potentially

need to be adjusted if the view has been set to

BSCAN

. Use the following steps to

adjust these settings directly from the measurement screen as follows:

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for PVX-B























































































Search results

Summary of Contents for PVX-B

Reviews:

Related manuals for PVX-B

Brands by name

Popular brands

DAKOTA ULTRASONICS PVX-B, Operation Manual

Search results

Summary of Contents for PVX-B

Reviews:

Related manuals for PVX-B

Brands by name

Popular brands