DAKOTA ULTRASONICS PVX-B Operation Manual Download Page 70

Page: 70 / 86

Dakota Ultrasonics

3) Press the

ENTER

key to display the

Grid List Box

4) Use the

and

DOWN

arrow keys to scroll through the stored

Grids

until

the target

File

to delete is highlighted.

5) Press the

key to delete the

Grid

6) Press the

MEAS

key to return to the measurement screen.

Deleting All Files

1) Press the

MENU

key once to activate the menu items tab. Press the

MENU

key multiple times to tab right and the

ESC

key multiple times to tab left until

the

DATA

menu is highlighted and displaying the submenu items.

2) Use the

and

DOWN

arrow keys to scroll through the sub menu items

until

DELETE ALL FILES

is highlighted.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for PVX-B























































































Search results

Summary of Contents for PVX-B

Reviews:

Related manuals for PVX-B

Brands by name

Popular brands

DAKOTA ULTRASONICS PVX-B, Operation Manual

Search results

Summary of Contents for PVX-B

Reviews:

Related manuals for PVX-B

Brands by name

Popular brands