PVX-B
Precision Visual Thickness Gauge
53
enables a user to make scanned passes over an arbitrary length of the test material,
while still maintaining a reasonable representation of thickness over the scanned
area or region. The display will continue to be updated during the scan process, and
when the transducer is removed, the
PVX-B
will display the minimum reading found.
The procedure to use the
SCAN MODE
feature is outlined below:
Using the Scan Mode
1)
Press the
MENU
key once to activate the menu items tab. Press the
MENU
key multiple times to tab right and the
ESC
key multiple times to tab left until
the
UTIL
menu is highlighted and displaying the submenu items.
2)
Use the
UP
and
DOWN
arrow keys to scroll through the sub menu items
until
SCAN MODE
is highlighted.
3)
Use the
LEFT
and
RIGHT
arrow keys to toggle the
SCAN MODE
on/off.
4)
Press the
MEAS
key to return to the measurement screen.
9.3 Alarm Mode
The
Alarm Mode
feature of the
PVX-B
provides the user with a method of setting
tolerances, or limits, for a particular application requirement. This feature may be
used for incoming material inspections to verify the material received is within the
manufacturer specifications. There are two limits, or alarm values, that can be setup
in the
PVX-B
–
ALARM LO LIMIT
and
ALARM HI LIMIT
. However, the user may
choose to activate and utilize only one of the limit values, depending on their specific
application requirements. The procedures to use the
ALARM MODE
feature are
outlined below:
www.
GlobalTestSupply
.com
Find Quality Products Online at:
