DAKOTA ULTRASONICS PVX-B Operation Manual Download Page 68

Page: 68 / 86

Dakota Ultrasonics

6) Abort the

Grid View Box

by pressing the

MEAS

key at any time.

Note:

Every time a reading is saved to memory, a picture of the display is

automatically saved with the reading.

10.4 Viewing stored readings

It is sometimes necessary to go back and view the stored readings and waveforms
using the

PVX-B

without a PC. The following procedures outline this process:

Viewing Stored Readings & B-Scans

1) Press the

MEAS

key once to activate measure menu items. Press the

MEAS

key multiple times to move right and the

ESC

key multiple times to

move left until the

COL

ROW

cell is highlighted.

2) Press the

ENTER

key to display the

Grid View Box

3) Press the

DOWN

LEFT

, and

RIGHT

arrow keys to scroll the stored

readings and corresponding display view. Notice as the cursor is moved to

a different cell, the display will be updated with the display view saved with

the reading.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for PVX-B























































































Search results

Summary of Contents for PVX-B

Reviews:

Related manuals for PVX-B

Brands by name

Popular brands

DAKOTA ULTRASONICS PVX-B, Operation Manual

Search results

Summary of Contents for PVX-B

Reviews:

Related manuals for PVX-B

Brands by name

Popular brands