DAKOTA ULTRASONICS PVX-B Operation Manual Download Page 72

Page: 72 / 86

Dakota Ultrasonics

1) Press the

MENU

key once to activate the menu items tab. Press the

MENU

key multiple times to tab right and the

ESC

key multiple times to tab left until

the

DATA

menu is highlighted and displaying the submenu items.

2) Use the

and

DOWN

arrow keys to scroll through the sub menu items

until

EDIT

is highlighted.

3) Press the

ENTER

key to display the

Edit List Box

4) Use the

and

DOWN

arrow keys to scroll through the

Edit

options until

NOTE

INCR. DIR

is highlighted.

Note:

If editing the

INCR. DIR

, simply use the

LEFT

RIGHT

arrow keys to

scroll

NONE, NORTH, EAST, SOUTH,

WEST

Proceed to step 10

5) Press the

ENTER

key to activate the

Alpha Edit box

– Only used when

editing the

NOTE

6) Use the

UP,

DOWN, LEFT, & RIGHT

arrow keys to highlight the appropriate

alpha characters.

7) Press the

ENTER

key to select a character and advance to the next field of

the

Comments

8) Use the

CLR

key to backspace if necessary.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for PVX-B























































































Search results

Summary of Contents for PVX-B

Reviews:

Related manuals for PVX-B

Brands by name

Popular brands

DAKOTA ULTRASONICS PVX-B, Operation Manual

Search results

Summary of Contents for PVX-B

Reviews:

Related manuals for PVX-B

Brands by name

Popular brands