3-23
12. OPTIONAL CONDITION SETTING MODE
<
Key operation to enter/exit
>
<Key operation in this mode>
Whenever the
key is pressed, the indication changes.
For the determination of setting, turn the power breaker OFF after the setting.
S
LED screen
LCD screen
Setting method
Indications or setting items
C: Temperature unit = ˚C,
Pressure unit = kPa,
F
: Temperature unit = ˚F,
Pressure unit = PSI
ON : H code and D code are
displayed.
OFF: H code and D code are not
displayed.
1: ST9702-1 sensor
2: NTC type probe sensor
The temperature at which the H001
code is generated is set. 1, 2, 3, 4, 5,
10
(The unit is ˚C.)
The time at which the H002 code is
generated is set. 1, 2, 3, 4, 5, 10
(The unit is hour)
dEG C/F
CHARTLS
USDA1/2
H001
H002
Make selection using the key
and key. Press the key to
determine the selection.
Make selection using the key
and key. Press the key to
determine the selection.
Note: Refer to section 3.10.3 for
details about H & D codes.
Make selection using the key
and key. Press the key to
determine the selection.
Note: For details, refer to section 5.2.
Make selection using the key
and key. Press the key to
determine the selection.
Note: Refer to section 3.9.3.2.
Make selection using the key
and key. Press the key to
determine the selection.
Note: Refer to section 3.9.3.2
S
Temperature & pressure
display unit setting
Chartless code
(H code & D code)
Display setting
USDA sensor
type setting
H001 code generation
temperature setting
H002 code generation
time setting
S
S
S
I/O ON
F. PTI
S. PTI
M. CHECK
※
10
※
11
※
13
Power off
Unit off
All Lighting
(for 3 sec.)
Preparation
(for 18 sec.)
Current
indication
※
1
Circuit Breaker ON
for 3 sec.
for 3 sec.
for 3 sec.
for 3 sec.
for 3 sec.
※
12
Optional
Function
Setting
Basic
Function
Setting
Optional
Condition
Setting
Input
Data
I/O
Circuit Breaker OFF
after setting change
（
OFF when no setting changed
）
03̲LXE10E100以降(13-26)̲E.qx 08.8.28 5:51 PM ページ 3-23
https://daikin-p.ru
