10
English
How to block the air outlet for 2-way or 3-way air discharge
•
For 2-way air discharge, in addition to the attached blocking material, the optional blocking material kit for
2-way discharge is required.
The attached blocking material and the optional blocking material for 2-way discharge can be used in com-
mon for any air outlet.
•
For 2-way air discharge, give caution to the inclination of the indoor unit when installing. For details, follow
the instruction mentioned in the section “
5. INSTALLATION OF THE INDOOR UNIT
”.
(1)
Remove the horizontal blade of the air outlet to be blocked. (Refer to Fig. 10 and Fig. 11)
1. Without applying force to the bearings, lift the horizontal blade with both hands and remove it from the
bearing at the side of the motor not mounted.
2. After turning the horizontal blade backward, remove the claw of the bearing on the motor side. Then, lift
the horizontal blade and remove it.
(2)
Fix the blocking material to the air outlet. (Refer to Fig. 12 and Fig. 13)
1. Insert the projected part (2 places) of the blocking material into the clearance between the upper deco-
ration panel and the insulation.
2. Insert the bent part (2 places) at both ends of the blocking material into the clearance between the lower
decoration panel and the drain pan until you hear a clicking sound.
When doing this work, lift the end of the lower decoration panel slightly and insert the blocking material.
If it is difficult to insert it, first loosen the screws on the both sides of the lower decoration panel and then
insert it.
3. Insert the bent part (2 places) inside the blocking material into the clearance between the lower deco-
ration panel and the drain pan until you hear a clicking sound, and then fix the blocking material.
Fig. 10
2.
1.
Motor
Horizontal blade
Bend the horizontal
blade and remove it.
Fig. 11
1.
Bend the horizontal
blade and pull it out.
2.
*
Turn the
horizontal blade
backward.
Lift the
claw on the
bearing side.
Remove
the horizontal
blade.
Bearing
Claw parts
Bearing
Horizontal blade
Claw (Lift upward.)
* When the horizontal blade
is difficult to remove,
slowly push down the
horizontal blade in the
direction of this arrow.
The horizontal blade will
become easier to remove.
4PEN469441-1.book Page 10 Tuesday, March 21, 2017 1:49 PM