![background image](http://html2.mh-extra.com/html/daikin/fua100aveb/fua100aveb_installation-manual_4703890009.webp)
English
7
(2)
Ceiling height
•
This indoor unit can be hung from the ceiling of which height is up to 3.5m (models 100·125: up to 4.0m).
•
However, if the ceiling height exceeds 2.7m (models 100·125: 3.2m), it is necessary to set on site from
the remote controller. Refer to the section “
10. FIELD SETTING
”.
(3)
Air discharge direction
Select the air discharge pattern according to the installation location.
In case of 2-way and 3-way, it is required to set on site from the remote controller.
For details, refer to the section “
10. FIELD SETTING
”.
(Caution) Since there is some restriction on the piping connection side, make sure to select the air dis-
charge pattern from the
Fig. 3
.
The names of air outlet are shown in inscription by the number of “
” marks on the underside of the air
outlet.
(Refer to the Fig. 4)
(4)
Use hanging bolts for installation.
Investigate if the installation place can withstand the mass of the indoor unit and, if necessary, hang the
unit with bolts after it is reinforced by beams etc.
(Refer to the installation pattern paper (11) for the mounting pitch.)
Fig. 3
(Discharge pattern) (Views from the ceiling)
4-way discharge
3-way discharge
2-way discharge (optional blocking material kit 2-way
discharge is required)
1
3
2
4
1
2
2
4
1
3
2
1
2
4
: Backward outlet piping
(straight outlet)
: Rightward outlet
piping (piping needs
to be bent)
For upward outlet piping,
any outlet pattern can be
selected.
The indication " "
shows the refrigerant
piping outlet direction.
.
Name of air outlet Indication on indoor unit
Indication on
indoor unit
No. of air
outlet
Indoor unit
Air outlet 1
Air outlet 2
Air outlet 3
Air outlet 4
* : This indication shows the air discharge direction.
For cross-reference of air outlet No. to indication
on indoor unit.
Fig. 4
4
4PEN469441-1.book Page 7 Tuesday, March 21, 2017 1:49 PM