![background image](http://html2.mh-extra.com/html/daikin/fua100aveb/fua100aveb_installation-manual_4703890025.webp)
English
23
CAUTION FOR WIRING
•
For connection to the terminal block for indoor-outdoor transmission wiring, use ring type crimp style ter-
minals with insulation sleeve or treat the wiring with insulation.
(Refer to Fig. 37)
Remote controller
wiring
30-35mm
3
2
1
60-80mm
20-50mm
Clamp (4) (accessory)
After the wiring are
fixed, cut the extra
part.
< Remote
controller
wiring >
Outdoor unit
Indoor unit
1
2
3
1
2
3
(Terminal block)
(Terminal block)
The numbers must match
Method of connecting
transmission wiring
between indoor unit and
outdoor unit.
< Transmission wiring ·
Earth wiring >
Fig. 36
Non woven
fabric (15)
Start sticking from the
radius ending line.
< Non woven fabric (15)
sticking method >
Non woven
fabric (15)
sticking
reference
The part of the wiring
shown with " " must be
orderly formed so that they
may not be tensioned.
(Sheath peeling allowance)
Prohibited
• Do not connect transmission
wiring (high voltage).
Approx. 7mm
Sheathed part
After the cover is peeled,
twist the wiring.
Transmission
wiring
Earth terminal
Earth
wiring
Earth
wiring
Sheathed
part
(Sheath peeling
allowance)
Terminal block for
remote controller
wiring (X1M)
Terminal block (X2M)
for indoor-outdoor
transmission wiring
Terminal block (X2M)
for indoor-outdoor
transmission wiring
Terminal block for
remote controller
wiring (X1M)
Bind the transmission
wiring and the earth
wiring, and the remote
controller wiring.
Clamp (4)
(accessory)
After the wiring are
fixed, cut the extra
part.
After the wiring are
fixed, cut the extra
part.
Clamp (4)
(accessory)
Transmission wiring ·
Earth wiring
< Transmission wiring ·
Earth wiring · Remote
controller wiring >
Transmission
wiring ·
Earth wiring
Insulation sleeve
Ring type crimp style terminal
Wiring
Fig. 37
4PEN469441-1.book Page 23 Tuesday, March 21, 2017 1:49 PM