![background image](http://html2.mh-extra.com/html/daikin/ftyn25gxv1b/ftyn25gxv1b_service-manual_4701921054.webp)
SiBE01-829
Instructions
Operation Manual
43
2.9
PERSONALIZE Operation
16
PERSONALIZE Operation
PERSONALIZE operation is the function which allows you to
record your preferred settings.
You can set your preferred setting one time by using this
function.
To set PERSONALIZE
operation
1. Hold down “PERSONALIZED button”
until “P1” blinks.
• Press again to cycle between “
P1
” and “
P2
”.
Choose P1 or P2.
2. Set your preferred setting.
3. Leave the remote controller for
15 seconds without pressing any
button and it will save the setting into
the programme.
To use PERSONALIZE operation
4. Press “PERSONALIZED button” once to activate the “P1” setting, and
press again to cycle between “P1” and “P2”.
• Press any key to deactivate the personalized setting.
MODE
SLEEP
SET
CLR
ON TIMER
CLR
SET
OFF TIMER
OFF
ON
PM
AM
˚
C
û
F
AUTO
P1
P2
1, 4
Summary of Contents for FTYN25GXV1B
