Instructions
SiBE01-829
34
Operation Manual
2.3
Preparation Before Operation
7
Preparation Before Operation
To set the batteries
1. Slide the battery cover by pulling it
according to the arrow direction.
2. Insert new batteries making sure that the
(+) and (–) of battery are installed correctly.
3. Reattach the cover by sliding it back into
position.
ATTENTION
About batteries
• When replacing the batteries, use batteries of the same type, and replace the two old
batteries together.
• When the system is not used for a long time, take the batteries out.
• The batteries will last for approximately one year. If the remote controller display begins to
fade and the degradation of reception performance occurs within a year, however, replace
both two batteries with new size AAA alkaline batteries.
• The attached batteries are provided for the initial use of the system.
The usable period of the batteries may be short depending on the manufactured date of the
air conditioner.
OFF
ON
PM
AM
˚
C
˚
F
AUTO
P1
P2
2
3
1
Summary of Contents for FTYN25GXV1B
