![background image](http://html2.mh-extra.com/html/daikin/ftyn25gxv1b/ftyn25gxv1b_service-manual_4701921047.webp)
Instructions
SiBE01-829
36
Operation Manual
9
To set the clock
1. Hold down “
” or “
” button for
2 seconds.
2. Press “
” button to increase the
clock time.
3. Press “
” button to decrease the
clock time.
4. Leave the remote controller for
4 seconds without pressing any
button.
NOTE
Tips for saving energy
• Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save
energy.
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling
(heating) effect.
• Clogged air filters cause inefficient operation and waste energy.
Clean them once in about every two weeks.
Please note
• The air conditioner always consumes 5 watts of electricity even while it is not operating.
• If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the
breaker OFF.
• Use the air conditioner in the following conditions.
• Operation outside this humidity or temperature range may cause a safety device to disable the system.
MODE
SLEEP
SET
CLR
ON TIMER
CLR
SET
OFF TIMER
OFF
ON
PM
AM
˚
C
û
F
AUTO
P1
P2
1, 2
1, 3
Recommended temperature setting
For cooling: 26˚C – 28˚C
For heating: 20˚C – 24˚C
Mode
Operating conditions
If operation is continued out of this range
COOL
Outdoor temperature: 10 to 46˚C
Indoor temperature: 16 to 30˚C
Indoor humidity: 80% max.
• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.
HEAT
Outdoor temperature: –10 to 24˚C
Indoor temperature: 10 to 30˚C
• A safety device may work to stop the operation.
DRY
Outdoor temperature: 10 to 46˚C
Indoor temperature: 16 to 30˚C
Indoor humidity: 80% max.
• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.
Summary of Contents for FTYN25GXV1B
