Daikin FTYN25GXV1B, Service Manual, Page: 85 / 97

SiBE01-829 Others
Others 107
1.3 Jumper Settings
1.3.1 When Two Units are Installed in One Room
„
How to set the different addresses.
„
When two indoor units are installed in one room, the two wireless remote controllers can be
set for different addresses.
PCB in the indoor unit
„
Remove the front panel.
„
Remove the electrical parts box (1-screw).
„
Slide the metallic cover to remove it. (4-claws on the electrical parts box.)
„
Cut the jumper JA on PCB.
Wireless remote controller
„
Cut the jumper J4 .
1.3.2 Jumper Setting
(R4758)
Address J4
CUT
EXIST
1
2
Metallic
cover
PCB
Electric
parts box
Claws (4 points)
Wireless
remote
controller
J4
CUT 2
ADDRESS: JA
EXIST 1
JA
JC
C1
C31
J30
JP11
ADDRESS
Jumper
(On indoor control PCB)
Function When connected
(factory set)
When cut
JC Power failure
recovery function Auto re-start Unit does not resume operation
after recovering from a power
failure. Timer ON-OFF settings
are cleared.