Daikin FTKS20CVMB(9), Service Manual

Page: 95 / 248

Instruction SiENBE04-512A
86 System Configuration
ATTENTION
„
To use ON TIMER operation
• Check that the clock is correct. If not, set the
clock to the present time.
1. Press “ON TIMER button”.
•
6:00
is displayed.
• “ “blinks.
2. Press “TIMER Setting button” until the time
setting reaches the point you like.
•
Every pressing of either button increases or
decreases the time setting by 10 minutes.
Holding down either button changes the
setting rapidly.
3. Press “ON TIMER button” again.
• The TIMER lamp lights up..
„
To cancel the ON TIMER operation
4. Press “CANCEL button”.
• The TIMER lamp goes off.
„
To combine ON TIMER and OFF TIMER
• A sample setting for combining the two timers is
shown below
„
In the following cases, set the timer again.
• After a breaker has turned OFF.
• After a power failure.
• After replacing batteries in the remote control.
ON
OFF
Di
s
pl
a
y
(Ex a mple)
Pre s ent time: 11:00 p. m.
(The u nit oper a ting)
OFF TIMER a t 0:00 a .m.
ON TIMER a t 7:00 a .m.
Com b ined
SiENBE04-512A.book Page 86 Friday, October 5, 2007 1:49 PM