Daikin EUWL KZW1 Series Service Manual Download

Page: 78 / 140

The Digital Controller: EUW5-24KZW1 and EUWL5-24KZW1

ESIE-0303

2–16

Part 2 – Functional Description

2.4

What Happens in Case of an Alarm or a Warning

Alarms and
warnings

The table below describes two types of safety devices:

Item

Alarm

Warning

Function

Protects the unit.

Gives additional service information.

Description

■

The unit is shut down.

■

The buzzer is activated.

■

The alarm is energized.

■

The display starts flashing,
alternately showing the alarm
code(s) and the inlet water
temperature.

The display starts flashing, alternately
showing the warning code and the inlet
water temperature.

Action to
take

Press

to deactivate the buzzer.

See "What to do in the event of an
alarm" on page 3–9.

—

Summary of Contents for EUWL KZW1 Series













































































































































Search results

Summary of Contents for EUWL KZW1 Series

Reviews:

Related manuals for EUWL KZW1 Series

Brands by name

Popular brands

Daikin EUWL KZW1 Series, Service Manual

Search results

Summary of Contents for EUWL KZW1 Series

Reviews:

Related manuals for EUWL KZW1 Series

Brands by name

Popular brands