3 Before operation
Operation manual
4
(C)(F)TXA15~50A2V1B(W)(S)(T)
Daikin room air conditioner
3P485919-7C – 2017.12
2.2.2
Status: User interface LCD
Icon
Description
Operation is active
Operation mode = Automatic
Operation mode = Drying
Operation mode = Heating
Operation mode = Cooling
Operation mode = Fan only
Powerful operation is active
Econo operation is active
Outdoor unit quiet operation is active
The indoor unit receives a signal from the user
interface
Current temperature setting
Airflow rate = Automatic
Airflow rate = Indoor unit quiet
Airflow rate = High
Airflow rate = Medium high
Airflow rate = Medium
Airflow rate = Medium low
Airflow rate = Low
Comfort operation is active
Intelligent eye is active
Automatic vertical swing is active
Automatic horizontal swing is active
Streamer is active
ON timer is active
OFF timer is active
Weekly timer is active
Day of the week
Icon
Description
Current time
2.2.3
To operate the user interface
a
≥500
(mm)
a
Signal receiver
Note:
Make sure that there are no obstacles within 500 mm under
the signal receiver. They may influence reception performance of the
user interface.
1
Aim the signal transmitter at the signal receiver on the indoor
unit (maximum distance for communication is 7 m).
Result:
When the indoor unit receives a signal from the user
interface, you will hear a sound:
Sound
Description
Beep-beep
Operation starts.
Beep
Setting changes.
Long beep
Operation stops.
3
Before operation
3.1
To fix the user interface to the wall
c
b
a
2×
a
User interface
b
Screws
c
User interface holder
1
Choose a place where the signals reach the unit.
2
Attach the holder with screws to the wall or a similar location.
3
Hang the user interface on the user interface holder.
3.2
To insert the batteries
The batteries will last for about 1 year.
1
Remove the front cover.
2
Insert both batteries at once.
3
Put back the front cover.
