4 Operation
Operation manual
8
(C)(F)TXA15~50A2V1B(W)(S)(T)
Daikin room air conditioner
3P485919-7C – 2017.12
2
To use fixed position, press
and
when the flaps
and louvers reach the desired position.
Result:
and
disappear from the LCD. The flaps and
the louvers will stop moving.
4.3.4
Comfort airflow and Intelligent eye
operation
You can use Comfort and Intelligent eye operation separately, or
combine them.
Comfort airflow operation
The unit will automatically change the direction of the airflow to heat
up or cool down the room more effectively. Direct airflow from the
unit will be less noticeable.
a
b
c
a
Flap position in cooling and dry operation
b
Flap range in heating operation (vertical airflow ON)
c
Flap position in heating operation (vertical airflow OFF)
In cooling and drying
The airflow direction will change to spread the air along the ceiling.
Comfort airflow ON
Comfort airflow OFF
In heating
The airflow direction will change to spread the air along the floor.
The unit detects the room and floor temperature and automatically
selects 1 of the 3 airflow directions.
Warming up
Downward
direction
Vertical airflow
direction
INFORMATION
If you want to deactivate the Vertical airflow function (e.g.
in case there is furniture or another object under the unit),
refer to
"To turn ON/OFF Vertical airflow function" on
page 8
. If the Vertical airflow function is deactivated, the
airflow will be set to downward direction.
INFORMATION
Powerful and Comfort airflow operation CANNOT be used
at the same time. The last selected function takes priority.
If the Vertical automatic swing is selected, Comfort airflow
operation will be cancelled.
To turn ON/OFF Vertical airflow function
1
Press
for at least 2 seconds.
Result:
The menu appears on the display.
2
Press
or
to change the menu screen.
Result:
The menu appears on the display.
3
Press
to change the setting.
4
Press
or
to change the setting.
…is blinking
Vertical airflow function is…
turned ON
turned OFF
5
To confirm the selected setting press
.
Note:
The display automatically returns to the default screen after
60 seconds. To return to the default screen sooner, press
twice.
Intelligent eye operation
The system detects movement in the room and automatically adjusts
the airflow direction and temperature in order to avoid direct contact
with people. If no movement is detected for 20 minutes, the system
switches to energy saving operation:
Operation
Energy saving operation
Heating
Temperature is lowered by 2°C.
Cooling and drying If the temperature in the room is:
▪ <30°C, the temperature is raised by 2°C
▪ ≥30°C, the temperature is raised by 1°C
Fan only
Decreases airflow rate.
About Intelligent eye sensor
NOTICE
▪ Do NOT hit or push the Intelligent eye sensor. Doing so
may lead to malfunction.
▪ Do NOT place large objects near the Intelligent eye
sensor.
▪
Detection range
. Up to 9 m.
▪
Detection sensitivity
. Changes according to location, the number
of persons in the room, temperature range, etc.
▪
Detection mistakes
. Sensor may mistakenly detect pets,
sunlight, moving curtains, etc.
To start/stop Comfort and Intelligent eye operation
1
Press
one or more times.
Result:
The setting will change as follows:
Display
Operation
Comfort airflow
Intelligent eye
+
Comfort airflow and Intelligent eye
—
Both deactivated
Note:
If there are people close to the front of the indoor unit or there
are too many people, use both operations at the same time.
