4 Operation
Operation manual
6
(C)(F)TXA15~50A2V1B(W)(S)(T)
Daikin room air conditioner
3P485919-7C – 2017.12
4
Press
or
to change the setting as follows:
If the unit is…
Symbol
Blinks
Result
In the middle of the wall
(factory default setting)
≤500 mm from the wall
on right
≤500 mm from the wall
on left
Result:
The airflow range will be adjusted to avoid direct contact
with the wall.
4
Operation
4.1
Operation range
Use the system in the following temperature and humidity ranges for
safe and effective operation.
Operation mode
Operation range
Cooling
(a)(b)
▪ Outdoor temperature: –10~46°C
▪ Indoor temperature: 18~32°C
▪ Indoor humidity: ≤80%
Heating
(a)
▪ Outdoor temperature: –15~24°C
▪ Indoor temperature: 10~30°C
Drying
(a)
▪ Outdoor temperature: –10~46°C
▪ Indoor temperature: 18~32°C
▪ Indoor humidity: ≤80%
If operated outside the operation range:
(a)
A safety device might stop the operation of the system.
(b)
Condensation might occur on the indoor unit and drip.
4.2
When to use which feature
You can use the following table to determine which features to use:
Feature
Tasks
Basic features
Operation modes and
temperature
To start/stop the system and to set the
temperature:
▪ Heat up or cool down a room.
▪ Blow air in a room without heating or
cooling.
▪ Decrease the humidity in a room.
▪ In Automatic mode, automatically
select an appropriate temperature
and operation mode.
+
Airflow
direction
To adjust the airflow direction (swing or
fixed position).
Feature
Tasks
Airflow rate
To adjust the amount of air blown into
the room.
To run more quietly.
Advanced features
Streamer
To remove airborne allergens such as
mold, pollen, adjuvant substances,
viruses, bacteria…
Econo
To use the system when you are also
using other power-consuming
appliances.
To save energy.
Outdoor unit quiet
To decrease the noise level of the
outdoor unit. Example: At night.
Comfort
To automatically adjust the airflow
direction to cool down or heat up the
room more effectively.
Intelligent eye
To prevent the air from coming in direct
contact with people.
To save energy when nobody is in the
room.
Powerful
To cool down or heat up the room
quickly.
ON timer +
OFF
timer
To automatically turn ON or OFF the
system.
Weekly timer
To automatically turn ON or OFF the
system on a weekly basis.
Additional features
Wireless LAN connection
To operate the unit using smart
appliances.
4.3
Operation mode and temperature
setpoint
When.
Adjust the system operation mode, and set the temperature
when you want to:
▪ Heat up or cool down a room
▪ Blow air in a room without heating or cooling
▪ Decrease the humidity in a room
What.
The system operates differently depending on the user
selection.
Setting
Description
Automatic
The system cools down or heats up a
room to the temperature setpoint. It
automatically switches between cooling
and heating if necessary.
Drying
The system decreases the humidity in a
room without changing the temperature.
Heating
The system heats up a room to the
temperature setpoint.
Cooling
The system cools down a room to the
temperature setpoint.
Fan
The system only controls the airflow
(airflow rate and airflow direction).
The system does NOT control the
temperature.
Additional info:
▪
Outside temperature.
The system's cooling or heating effect
decreases when the outside temperature is too high or too low.
