7
English
Turn the fi xing knobs (in two points) of the dust box and secure
(3)
the dust box.
(The front side of the panel is shown
for ease of explanation.)
Fixing
knob
Fixing
knob
Mounting S-shaped pipe (accessory (3)).
6-5
Mount the dust box side (engraved with A) before mounting the
brush side (engraved with B).
(Mount them so that the engraved characters will be in conformity.)
Dust box
Dust box
Brush unit
Make sure that
the engraved
characters are in
conformity with
each other.
2
Claws
(2 points)
Claw
(1 point)
Brush unit
Brush unit side
S-shaped pipe
(accessory (3))
Dust box side
Make sure that the
engraved characters
are in conformity with
each other.
1
Note
Check that the claws are engaged securely. Otherwise, a dust
collection failure may result.
ATTACHING SUCTION GRILLE AND
7.
DECORATION CORNER COVERS
The suction grill can be rotated and attached in two directions,
either one of which is selectable.
If a number of units are installed, adjust the directions of the suction
grilles if necessary. Make directional changes as well at the request
of the customer.
Attaching suction grille.
7-1
Select either the hook (A) or (B), and hook the claws of the
*
suction grille.
Note
The suction grille may be damaged if the wrong hooking side is
selected.
Hook (A).
7-2
Set the suction grille to an angle of approximately 45° and put
(1)
the hooks (in three points) onto the panel.
45°
Panel
Panel
Suction
grille
Suction
grille
SUCTION GRILLE HOOKING SIDE
Suction grille mounting angle
Display on
SUCTION GRILLE HOOKING SIDE
As shown in the illustration, hook the fall prevention cords for
(2)
the suction grille to the corner clasps (on two corners).
Change the directions of
the fall prevention cords.
Suction grille
Clasp
Fall prevention cord
Clasp
Bend the
clasp inward.
Fall prevention cord
Connect the fl exible hose (accessory (2)) onto the panel side.
(3)
(The fl exible hose (accessory (2)) has no directionality constraint.)
Flexible hose junction
on the panel side
Flexible hose
(accessory (2))
Flexible hose junction
on the panel side
Fit the claws into the
hooks (in two points)
securely.
Hooks
(2 points)
Note
Check that the claws are engaged securely. Otherwise, a dust
collection failure may result.
01_EN_3P257556-1.indd 7
01_EN_3P257556-1.indd 7
9/3/2009 4:05:14 PM
9/3/2009 4:05:14 PM
