![background image](http://html1.mh-extra.com/html/daikin/bycq140cgw1/bycq140cgw1_installation-manual_2460456009.webp)
English
8
Press fi t the fl exible hose connected in (3) into the panel.
(4)
(Pay attention so that the hose will not be caught by the
suction grille closed.)
Note
Be sure not to break the fl exible hose when press fi tting the
fl exible hose.
Flexible
hose
To suction grille
Press fit the
flexible hose
along the shape
of the corner.
Connect the opposite end of the fl exible hose connected in (3)
(5)
onto the suction grille side.
Rotate the fl exible hose joint on the suction grille side
*
according to the mounting direction of the suction grille as
shown in the illustration.
Flexible hose joint on
the suction grille side
Flexible hose
joint on the
suction grille side
Flexible hose
Connect the
hose securely.
Note
Check that the claws are engaged securely. Otherwise, a dust
collection failure may result.
Push up the suction grille slowly fi rst, and while pressing the
(6)
two knobs, fi nally fi t the grille into the panel securely.
Panel
Knobs
(2 points)
Suction grille
Note
The suction grille can catch the fall prevention cords while the
suction grill is closed.
Check that the fall prevention cords do not protrude from the
suction grille before closing the suction grille.
Suction grille
Must not protrude
Fall prevention
cord
Hook (B).
7-3
Set the suction grille to an angle of approximately 45° and put
(1)
the hooks (in three points) onto the panel.
45°
Panel
Suction
grille
Suction grille
Panel
Suction grille
mounting angle
SUCTION GRILLE HOOKING SIDE
Display on
SUCTION GRILLE HOOKING SIDE
As shown in the illustration, hook the fall prevention cords for
(2)
the suction grille to the corner clasps (on two corners).
Change the directions of the
fall prevention cords.
Suction grille
Clasp
Fall prevention cord
Clasp
Bend the
clasp inward.
Fall prevention cord
Connect the fl exible hose (accessory (2)) onto the panel side.
(3)
(The fl exible hose (accessory (2)) has no directionality
constraint.)
Flexible hose junction
on the panel side
Fit the claws into the
hooks (in two points)
securely.
Flexible hose
(accessory (2))
Flexible hose junction
on the panel side
Hooks
(2 points)
Note
Check that the claws are engaged securely. Otherwise, a dust
collection failure may result.
01_EN_3P257556-1.indd 8
01_EN_3P257556-1.indd 8
9/3/2009 4:05:26 PM
9/3/2009 4:05:26 PM