8
|
Configuration
Installer reference guide
146
EHYH EHYHBH/X08AF + EHYKOMB33AA
Daikin Altherma hybrid heat pump
4P355634-1F – 2020.10
#
Code
Description
Leaving water temperature range for the main leaving water temperature zone (=
the leaving water temperature zone with the lowest leaving water temperature in
heating operation and the highest leaving water temperature in cooling
operation)
[A.3.1.1.2.2]
[9-00]
Maximum temp (heating)
37°C~80°C (default: 80°C)
[A.3.1.1.2.1]
[9-01]
Minimum temp (heating)
15°C~37°C (default: 25°C)
[A.3.1.1.2.4]
[9-02]
Maximum temp (cooling)
18°C~22°C (default: 22°C)
[A.3.1.1.2.3]
[9-03]
Minimum temp (cooling)
5°C~18°C (default: 5°C)
Leaving water temperature range for the additional leaving water temperature
zone (= the leaving water temperature zone with the highest leaving water
temperature in heating operation and the lowest leaving water temperature in
cooling operation)
[A.3.1.2.2.2]
[9-06]
Maximum temp (heating)
37°C~80°C (default: 80°C)
[A.3.1.2.2.1]
[9-05]
Minimum temp (heating)
15°C~37°C (default: 25°C)
[A.3.1.2.2.4]
[9-08]
Maximum temp (cooling)
18°C~22°C (default: 22°C)
[A.3.1.2.2.3]
[9-07]
Minimum temp (cooling)
5°C~18°C (default: 5°C)
Leaving water temperature overshoot temperature
This function defines how much the water temperature may rise above the desired
leaving water temperature before the compressor stops. The compressor will
startup again when the leaving water temperature drops below the desired leaving
water temperature. This function is ONLY applicable in heating mode.
#
Code
Description
N/A
[9-04]
1~4°C (default: 1°C)
INFORMATION
This overshoot temperature applies to the heat pump leaving water temperature.
Note that when the gas boiler is operating, there can be a 5°C overshoot over the
desired boiler leaving water temperature.
Summary of Contents for Altherma EVLQ05+08CA
Page 249: ......
Page 250: ......
Page 251: ......
Page 252: ...4P355634 1F 2020 10 Copyright 2013 Daikin Verantwortung f r Energie und Umwelt...