Local Configurations
50
Function
Operation
Calling
AutoPan
Click
AutoPan
, the PTZ camera keeps horizontal rotating by 360°. Click
Stop
to stop rotating.
Using Flip
function
Click
Flip
to turn the image upside down (180°).
Reset
Click
Reset
to restore the camera to the default position.
4.2.2.5 Auxiliary Functions
On the PTZ control panel, click
Pg Switch
till the auxiliary functions setting interface is
displayed. See Figure 4-35. For details, see Table 4-14.
Auxiliary Functions
Figure 4-35
Table 4-14 Auxiliary function parameters description
Parameter
Description
Direct Aux
Controls the light of external device through RS-485 command. To use
this function, make sure it is supported on the external device.
In the function list, select
Light
. Click
On
to turn on the light, and click
Off
to turn off the light.
Controls the screen wiper of external device through RS-485 command.
To use this function, make sure it is supported on the external device.
In the function list, select
Screen Wiper
. Click
On
to turn on the screen
wiper, and click
Off
to turn off the screen wiper.
Controls the warming-up module of external device through RS-485
command. To use this function, make sure it is supported on the
external device.
In the function list, select
Clear fog
. Click
On
to turn on the fog clearing,
and click
Off
to turn off the fog clearing.
Aux Num
In the
Aux Num
box, enter a number that corresponds to the AUX switch on
the decoder. Click
On
to turn on the auxiliary number function, and click
Off
to turn off the auxiliary number function.
PONE
Select the
PONE
check box, the PTZ camera first turns to the configured
preset when it is turned on.
POFE
Select the
POFE
check box, the PTZ camera first turns to the configured
preset when it is turned off.
