Dahua MCVR6204 User Manual Download Page 236

Page: 236 / 239

Mouse Operations

225

Mouse Operations

Appendix 1

The operations are based on the considerations for right-handed users.

Beside the operations from the front panel and remote control, you can also use mouse to

operate menus. Connect the mouse to the USB port of the Device.

Operation

Function

Click (click the

left mouse

button)

If the user has not logged in the system, the password box is displayed first.

During real-time monitoring, click the left mouse button to enter the main

menu.

When you have selected one menu item, click it to view menu content.

Implement the operation indicated on the control.

Change the status of the check box.

Click the combo box, the drop-down list is displayed.

Summary of Contents for MCVR6204
















































































































































































































































Search results

Summary of Contents for MCVR6204

Reviews:

Related manuals for MCVR6204

Brands by name

Popular brands

Dahua MCVR6204, User Manual

Search results

Summary of Contents for MCVR6204

Reviews:

Related manuals for MCVR6204

Brands by name

Popular brands